Everyone generally looks at the comparison of its appearance. After the stainless steel light tube is done, the appearance is generally smooth and bright, and it has the nature of a metal composite material. The stainless steel light bright tube is mostly a smooth, and it is polished and polished with polishing equipment. It is also known as the surface utility and mirror glass with high bright surface and high brightness. Ensure the requirements of stainless steel light tube. Generally, the factors of insufficient luster of the surface layer of stainless steel light tube are in the following aspects. Let's take a look with Fujian Minghong Management Industry Technology Co., Ltd..

1. Disadvantages will appear on the surface layer of the raw material itself. For example, scratches, black spots, scratches, sandht holes, and possibilization and other problems. It is that the tensile strength of the raw material is not so high, and it is not very easy to polish and polished when polishing and polishing. When the surface layer is rated, it is very prone to the orange skin condition, which will damage the performance of the stainless steel light tube.

2. Some stainless steel light tubes after launching. Some dark spots will occur after the deformation, which will damage their characteristics.

3. There is too much emulsion oil content. If the oil in the emulsification solution cannot be cleaned immediately after the continuous high temperature carbulization, this ferrite is likely to accumulate on the surface layer of the 304 stainless steel light, and then cause the pressure after the cold tie. Causes insufficient gloss.

The mirror glass sandwich glass of the stainless steel light tube is expected to be called brighter. It means that the stainless steel tube can get the real mirror glass granular glass after grinding and polishing and polishing. The surface treatment field of metal materials for stainless steel decorative tube is generally divided into stainless steel brushes and bright faces. The two types also meet the product needs of most customers. Some customers choose to make stainless steel light tubes to make more unique equipment. Naturally, costs will be accompanied by improvement. Therefore, the pretentious goal of the shiny surface of stainless steel tubes is also important.